IN Brief:
- UK Power Networks has awarded contracts covering 29.4 MW of flexibility at 59 locations across its distribution areas.
- Fourteen providers have secured agreements, with approximately 15,000 electric vehicle chargers among the participating assets.
- The contracts have a potential value of £4 million and extend procurement into the 2028–2033 RIIO-ED3 regulatory period.
UK Power Networks has awarded electricity flexibility contracts covering 29.4 MW of capacity across 59 locations in London, the South East, and the East of England, extending its procurement arrangements into the next electricity distribution regulatory period.
The agreements have a potential combined value of up to £4 million and involve 14 flexibility providers, including two new participants. Approximately 15,000 electric vehicle chargers are represented among the assets contracted to help manage demand on the distribution network.
The awards were disclosed on 18 November following a tender conducted by UK Power Networks’ Distribution System Operator (DSO). The procurement introduced a three-year forward planning horizon, with contracts extending into the RIIO-ED3 regulatory period running from 2028 to 2033.
UK Power Networks has described the tender as the first in Great Britain to secure distribution flexibility services extending into that period. The approach follows feedback from providers seeking greater certainty about future opportunities to supply flexibility.
Flexibility services allow electricity network operators to request changes in the consumption or generation of connected assets at particular times and locations. These changes can reduce loading on constrained equipment or help manage electricity flows where demand and generation patterns differ from those originally anticipated.
Distribution networks contain transformers, cables, overhead lines, and switching equipment with defined operating limits. If demand or generation causes loading, voltage, or other electrical conditions to approach those limits, the operator must determine whether the network can continue operating safely.
Reinforcing the network by installing additional physical capacity is one option. Flexibility provides an alternative where suitable connected assets can alter their operation sufficiently to manage an identified constraint, either temporarily or over a longer period.
The value of a flexibility service depends on its electrical location. Reducing demand downstream of a constrained transformer may relieve loading on that asset, while an equivalent reduction elsewhere on the distribution network may provide little or no benefit.
UK Power Networks therefore contracts services against particular network requirements rather than treating all available flexibility as interchangeable. The 59 locations in the latest procurement represent areas where the operator has identified a requirement for additional operating flexibility.
The aggregate 29.4 MW capacity does not mean the entire amount can be dispatched to resolve a single constraint. Each contracted service is associated with the relevant network location, availability requirements, and conditions under which the provider can deliver a response.
Service providers may include electricity suppliers, aggregators, and operators of flexible equipment. Aggregators coordinate assets owned or operated by other organisations, allowing many smaller devices to participate in services that would be impractical to provide individually.
Electric vehicle chargers are a substantial part of the latest awards. Approximately 15,000 chargers are represented among the contracted assets, creating opportunities to modify charging demand when network conditions require a response.
Managed charging can reduce or postpone electricity consumption during a constrained period and allow charging to resume later. Whether this is possible depends on the vehicle’s charging requirements, connection status, charger controls, and any restrictions imposed by the customer or equipment operator.
A charger may have a substantial maximum electrical rating but little available flexibility when it is disconnected, not charging, or already operating at a reduced power level. Providers must therefore estimate the capacity that can reliably be delivered rather than relying solely on the combined ratings of the equipment they manage.
The same distinction applies to other flexible assets. Battery storage may be capable of changing its electricity import or export, while distributed generation and certain industrial loads can alter their operation under suitable conditions. Their contribution depends on equipment availability, operating limits, and contractual commitments.
Contracted flexibility also requires measurement. The operator must establish whether a provider delivered the requested change in consumption or generation during the relevant period, using appropriate metering and baseline arrangements.
Baseline calculations are important because the service being purchased is a change from expected operation. A reduction in demand cannot be established simply by observing that consumption was low during a particular interval; the relevant contract must define how the delivered response is assessed.
Communication and control arrangements must support the dispatch process. Providers need to receive activation instructions, coordinate the operation of their assets, and supply the information required to verify availability and performance.
Those requirements become more complex when flexibility is delivered by thousands of distributed devices. Individual chargers or other assets may change their availability during the day, requiring aggregators to maintain an accurate view of the capacity they can offer.
UK Power Networks already operates day-ahead flexibility auctions, introduced in April 2024, through which services can be procured closer to the period when they are required. These arrangements sit alongside longer-term procurement rather than being replaced by it.
Day-ahead auctions allow providers to offer services against operational requirements identified shortly before delivery. Longer-term contracts establish opportunities over a wider planning horizon, providing greater visibility of potential revenue and supporting investment in equipment, systems, and customer recruitment.
The distinction also affects network planning. Where a future constraint can be managed reliably through contracted flexibility, the operator may be able to defer some reinforcement work. Physical investment remains necessary where equipment condition, demand growth, or reliability requirements make additional capacity unavoidable.
Determining whether flexibility provides a suitable alternative requires an assessment of cost, availability, expected network loading, and the consequences of a service not being delivered. UK Power Networks incorporates these considerations into its distribution network options assessment process.
The latest procurement extends the planning horizon into RIIO-ED3, the next regulatory period for electricity distribution networks. However, the fact that a tender looks three years ahead does not establish that every participating asset has been contracted to deliver a continuous service over the entire period.
Similarly, the announced £4 million represents the potential value of the agreements rather than expenditure already incurred. Actual payments depend on the contractual arrangements and the availability or delivery of services under the relevant agreements.
The extension follows industry feedback about the difficulty of investing in flexibility capability without sufficient visibility of future procurement opportunities. Longer-term arrangements can help providers evaluate the commercial basis for recruiting customers, installing control systems, and maintaining the equipment required to participate.
UK Power Networks’ flexibility programme operates across three distribution licence areas serving London, the South East, and the East of England. The network must accommodate growing electricity demand associated with vehicle charging, electrified heating, and other technologies alongside changes in distributed generation.
These developments can increase loading on individual network assets even where the system has sufficient capacity elsewhere. Location-specific flexibility provides a means of managing some of those constraints while reinforcement projects and other network investments are assessed.
The 29.4 MW awards establish contracted capability at 59 identified locations, including a substantial number of controllable vehicle chargers. Subsequent data on service activation, availability, delivered capacity, and payments will establish how extensively the contracted resources are used as the network’s operating requirements develop.


