IN Brief:
- BW ESS and Wattmen have formed a partnership targeting approximately 500 MW of standalone French battery projects over three years.
- Projects will seek transmission connections of at least 100 MW, with a minimum four-hour storage duration at suitable sites.
- The partnership is a development pipeline, separate from BW ESS's previously acquired 200 MW / 800 MWh French portfolio.
BW ESS has formed a development partnership with French specialist Wattmen targeting approximately 500 MW of standalone battery energy storage projects over the next three years. The companies intend to originate large installations connected to France’s transmission network, focusing on sites with at least 100 MW of connection capacity and enough space for batteries offering a minimum four-hour duration.
Wattmen will lead site identification, land agreements, permitting and coordination with electricity network operators, while BW ESS will contribute storage investment, engineering design and procurement experience. The agreement covers the progression of potential developments from initial site selection towards ready-to-build status, with each scheme still needing its own connection arrangements, authorisations and investment decision before construction can proceed.
The partners’ proposed minimum project scale places the emphasis on transmission-connected assets rather than smaller batteries serving an individual consumer or embedded generation site. A battery able to discharge 100 MW for four hours would need a nominal energy capacity of roughly 400 MWh. Meeting that requirement also involves allowing for the conversion equipment, battery operating range and network limits defined during design.
Across a portfolio of 500 MW, a consistent four-hour rating would imply approximately 2 GWh of nominal storage energy. That is a conditional calculation from the announced power target and minimum duration, as BW ESS has yet to disclose a confirmed portfolio rating in megawatt-hours. Individual project capacities, selected sites and construction schedules will be established through the development process.
A transmission-connected battery exchanges electricity with the wider power system through a high-voltage grid interface, rather than operating solely behind a customer’s meter. Suitable transformers, converters, switchgear, protection systems and controls enable charging and discharge within the agreed connection rating. The facility’s ability to participate in energy markets or provide system services depends on its final technical specification and the rules under which it qualifies.
Four-hour storage allows an operator to move a larger quantity of electricity between trading periods than a shorter-duration system with an equivalent power rating. It may also support longer dispatch instructions during network balancing events, provided sufficient charge remains available. Conversion losses, minimum state-of-charge requirements and battery management constraints determine how much energy can be dispatched from the installation at any point.
Securing a viable site will depend on both land availability and network connection feasibility. Large battery developments need space for containers, inverters, transformers, access, drainage and safety systems, with grid interface works forming a substantial part of the delivery programme. A site close to an existing connection point may reduce cable length, while network studies establish the available capacity and any reinforcement requirements.
Wattmen’s local development team will undertake the land negotiations, planning processes and grid coordination required to turn those opportunities into defined schemes. BW ESS will provide input on equipment selection, electrical configuration and procurement strategy. Assigning these responsibilities early gives the partners a route to compare potential projects against the network and planning conditions that govern whether construction can go ahead.
French electricity demand, renewable generation and network operating conditions will influence where the batteries can provide value. Stored electricity can be released when demand and market prices justify discharge, while charging depends on available energy and connection constraints. Curtailment relief and system services will depend on the location and qualification of each asset; the partners have not forecast dispatch volumes or project-level returns for the proposed portfolio.
BW ESS has already expanded into France through the acquisition of two storage projects from Recurrent Energy, together rated at 200 MW and 800 MWh. Those assets were acquired at a more advanced development stage, while the Wattmen partnership is designed to originate additional greenfield opportunities. The two routes give BW ESS different ways to assemble its French pipeline, from earlier site development to projects further through permitting and grid access.
The acquired projects and new target also have different levels of delivery certainty. The original 200 MW portfolio comprises identified assets, whereas the 500 MW ambition is a prospective development programme whose individual schemes will be evaluated over the next three years. BW ESS has not provided a consolidated construction schedule or operational forecast for both groups of projects.
BW ESS has used local development partnerships in other markets to gain access to project origination expertise, while applying its own approach to storage engineering and procurement. In France, the new collaboration will focus initially on viable sites, connection access and authorisations rather than equipment installation. Battery suppliers, EPC contractors and offtake arrangements remain to be determined for the prospective Wattmen projects.
Hazel Starmer-Jones, Development Director at BW ESS, said Wattmen’s local technical expertise was central to the decision to partner. Jean-Marc Guenée, CEO and Co-Founder of Wattmen, described the companies’ capabilities as complementary. Both executives framed the agreement around progressing suitable projects, with the pace of permitting and connection approvals determining when individual developments can reach construction readiness.
The partnership will be measured first through the identification of project locations, land agreements, grid connection offers and successful permitting. Those steps will determine how much of the proposed 500 MW pipeline can reach ready-to-build status during the three-year development period and subsequently attract construction investment.



