EnBW approves 170 MWh Forbach battery project

EnBW approves 170 MWh Forbach battery project

EnBW has approved a 170 MWh battery project at Forbach. The 46 MW system is intended to complement the pumped storage development under construction at the same site, with battery commissioning targeted for 2029.


IN Brief:

  • EnBW has approved a 46 MW / 170 MWh battery project at its Forbach power station in Germany.
  • Existing cable routes, transformer space and switchgear infrastructure from the former Murgwerk will be considered for reuse.
  • Battery construction is planned for 2028, with operation in 2029 alongside a separate pumped storage redevelopment.

EnBW has approved a 46 MW battery energy storage project with 170 MWh of capacity at its Forbach hydroelectric site in Baden-Württemberg, Germany. The system will be developed alongside the utility’s pumped storage redevelopment, with battery construction planned for 2028 and operation scheduled for 2029.

The battery is planned for a terraced area within the existing power station site, where parts of the former Murgwerk electrical infrastructure could be reused. EnBW has identified cable routes, transformer space and a switchgear building as potential assets for the installation. The company intends to finance the battery commercially, without public subsidy, using revenues available through electricity markets. It has not disclosed the capital cost or selected equipment suppliers.

With 46 MW of rated power and 170 MWh of energy capacity, the proposed battery has a nominal full-output duration of approximately 3.7 hours before operating limits and losses are considered. EnBW describes the system as a four-hour battery. Its power rating governs the maximum charging or discharging rate, while the energy rating determines how long that output can be sustained and what capacity remains after earlier dispatch instructions.

The investment will add a second storage technology to a site where EnBW is already rebuilding the Rudolf-Fettweis hydroelectric complex. The hydro scheme uses water as its energy store, moving it between reservoirs when electricity is available and releasing it through a turbine when generation is required. The battery uses electrical conversion equipment to move energy into and out of electrochemical cells, enabling a different response and operating profile.

Forbach’s pumped storage arrangement centres on the Schwarzenbach reservoir as the upper store and new underground storage infrastructure at a lower elevation. During pumping, electrically driven machinery moves water uphill; during generation, water flows back through the turbine. The energy recovered depends on the volume moved, the elevation difference and losses in the hydraulic and electrical equipment. Water levels and plant availability constrain the operating cycle.

EnBW’s technical description assigns approximately 54 MW of generating output and 57 MW of pumping power to the Schwarzenbach pumped storage unit, with around 456 MWh of energy available per cycle. The site’s Murgwerk generation remains a separate component of the hydro complex. These hydro ratings describe machinery and water storage already covered by the redevelopment; the newly authorised battery adds another 46 MW of discharge capability and its own 170 MWh energy store.

The different technologies could be dispatched over different intervals. Power electronics allow a battery to alter electrical output rapidly, while pumped storage involves rotating hydraulic machinery and reservoir management. Combining them at one generating location may give EnBW more options when responding to price movements or system service requirements, subject to the individual connection, operating permissions and contracts. The company has not specified a joint dispatch platform for the two installations.

Reusing established electrical routes and equipment space may simplify the construction interface, although existing infrastructure must still be assessed against the new installation’s load flows and fault duties. Engineers will need to establish suitable transformer ratings, protection settings, switching arrangements and cable thermal capacity before energisation. The battery will also require power conversion equipment and controls capable of meeting the applicable grid connection requirements.

Site layout will have to accommodate battery enclosures, conversion equipment, access roads, ventilation or cooling systems and fire safety provisions. Working within an established power station can constrain the space available for such systems, particularly while other civil and electrical works continue nearby. EnBW has not announced the battery chemistry or final equipment layout, and published photographs of the company’s larger Philippsburg project should not be used to describe the Forbach installation.

EnBW expects market revenues to underpin the unsubsidised investment. The battery could charge during periods of lower electricity value and discharge when prices or system requirements support it, while any provision of ancillary services would require technical qualification and suitable market access. The actual operating schedule will be determined by available capacity, degradation management and contracted duties rather than by its headline energy rating alone.

The company already operates 20 batteries with more than 100 MWh of installed energy capacity and is developing a further 3,000 MWh. A separate project at the former Philippsburg nuclear site has approximately 400 MW of power and 1 GWh of planned storage capacity. Forbach is smaller, but its location alongside a pumped storage scheme creates a different set of electrical and operational interfaces from those at a standalone battery development.

Construction of the hydro redevelopment began ahead of the newly approved battery programme. The two projects will continue to follow separate engineering, installation and commissioning schedules, even where the battery makes use of existing infrastructure. EnBW’s current battery timetable sets the start of construction in 2028 and targets operation during 2029; the latest investment decision does not revise the hydro plant’s operating date.

Detailed design, equipment procurement and electrical integration are the next stages for the battery before site works begin. The resulting Forbach complex is intended to combine the duration offered by water storage with the fast response of batteries, while retaining separately defined power ratings, energy capacities and construction programmes.


  • RES wins North American battery controls contracts

    RES wins North American battery controls contracts

    RES signs two North American battery control support service agreements. Covering 70 MWh of storage, the contracts combine energy management, plant control and operational technology cybersecurity for customers in Canada and the United States.


  • National Grid tests shared industrial connection approaches

    National Grid tests shared industrial connection approaches

    National Grid plans shared electricity connections for West Midlands manufacturers. The partnership starts with a Cradley Heath project examining how industrial demand and connection costs could be managed collectively.